Related Articles

WPCRSET:

Now lets have a look at the other program, WPCRSET.......

You need to install it by running the program INSTDD.EXE, this will then install the program onto your computer, you will need to reset before any changes can be made.

When you are done you will need to run WPCRSET.EXE.

You will be presented with the following screen:

This shows a register change already set for start up, the one for register 52 as you can see.

To set any registers you wish at start up you need to make sure that at the top right it is set to Start..... then simply hit Add to add a new setting to it. You will be greeted with a screen like below:

You simply enter the register number under register and the setting you wish to apply under Data, simple.

Then you'll need to restart once you are done for any changes to take place.

If for some reason windows doesn't like one of your settings and will not load, just hold down the Ctrl key on startup and it will bypass your startup files.

The End

Some of you will have successes with this and many of you will not. You can and very likely will lock up your system while doing this. These changes are by no means permanent. Simply restarting your system will restore anything that has been changed. Always test things with WPCREDIT before setting them in WPCRSET.

I am using the 845D in my main system currently and I'm looking forward to the DDR 333 version of this chipset. You can bet on me updating this article and keeping up on more things on the Intel side of things in the future.

Happy Tweaking everybody!