Neoseeker.com Forum Thread: M7VKB with Athlon 1200 - page 1

reprinted from http://www.neoseeker.com/forums/
original thread: http://www.neoseeker.com/forums/685/t502047-m7vkb-with-athlon-1200/


Author:   Dontknow
Date:   (PT)
Subject:   M7VKB with Athlon 1200
-------------------------------------------
I just tried to install an Athlon 1200 on an old M7VKB motherboard I still own and use for testing, but it only recognizes it as a 900 one. Everything works, but at 900 Mhz.

I installed the last BIOS upgrade I found (1031f) but this doesn't solve the problem either.

Has anyone an advice?

Thanks!



Author:   Dontknow
Date:   (PT)
Subject:   re: M7VKB with Athlon 1200
-------------------------------------------
As no one has answered to my question, I'll reformulate it in another way.

I found out in the meantime that to get 133 fsb I should short pin 1-2 and 5-6 of JCLK1.
This jumper set doesn't exist on my board, there is only the place where the jumpers should be, with a strap shorting the contacts corresponding to pin 1-2.

As 133fsb= pin 1-2 and 5-6, would it help if I soldered a strap to short the place where pin 5-6 should be?
Would I get 133 fsb this way, or does this mb miss some chips to operate this function?

Hope someone let me know. Thanks!



Author:   land
Date:   (PT)
Subject:   re: M7VKB with Athlon 1200
-------------------------------------------
It wonīt be probably clear expected answer, but...just today Iīve learnt on Net something about VKB...Iīve got it like a trash with burned Duron...be carefull about version of your VKB - on the left end of PCI/ISA shared connector is text: "ver:1.0" (or 1.1, 2.0 etc.) I have (of course(;-))) ver:1.0 and have the same problem. Despite the amount of released versions (which is not visible on name "M7VB") I didnīt find the properties or differences between versions - maybe that 2.X versions have all pins...Sorry of my english



Author:   FRANKB
Date:   (PT)
Subject:   re: M7VKB with Athlon 1200
-------------------------------------------
Use a Duron B processor.I have the same board MVVKB with no jumper settings and I used a Duron 1300B 100MHZ front side buss,booted up just fine.



Author:   FrankB
Date:   (PT)
Subject:   re: M7VKB with Athlon 1200
-------------------------------------------
I meant M7VKB motherboard.


Copyright Neo Era Media, Inc. 1999-2009.
All Rights Reserved.